NGConnect 0.3

It’s now with gray-coded encoders support on board. Sample config is included in package. Encoder’s common must be connected to the GND pin while A & B channels to successive digital pins (in example config – pins 6 and 7). Put first of two pins in configuration and never use other pin for any other inputs/outputs (anyway it’s not available physicaly).

Download it here

If you start with this version you still need to read installation manual here

Feedback is always highly appreciated.

5 thoughts on “NGConnect 0.3”

  1. goodnight friend has as you make a tutorial video explaining how to set up communication with SIOC and also as add a key lever to the program
    thankful

  2. Hi .. a while back I asked about the 0/1 for lighting up LEDs, when prosim sends a 0 the LED lit up and went off when it receives a 1. I see that is now working properly in 0.3, thanks !

    I wonder, if it is possible to show the Unique IDs string (i.e. BAT_DISCARGE_LED) in the table of IN/OUT,etc… that way, with a glance, you know what IOCP code and pins are assigned to what function.

      1. Hi ..

        Also been playing with the new grey encoder function. I have these cheap chinese encoders and looks like they send 4 pulses for every detent, so with one detent on the encoder, my MCP ALT value would jump from 20000 to 20400 instead of 20100 or example. Is there a way with a script to make it only send the IOCP value once per detent instead of 4 times ?

        Thanks

  3. Arduino: 1.6.10 (Windows 10), Board: “Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)”

    C:\Users\C855-1J2\Documents\Arduino\NGConnect\NGConnect.ino:1:18: fatal error: string: No such file or directory

    #include

    ^

    compilation terminated.

    exit status 1
    Error compiling for board Arduino/Genuino Mega or Mega 2560.
    Invalid library found in F:\Program Files (x86)\Arduino\libraries\quadrature: F:\Program Files (x86)\Arduino\libraries\quadrature
    Invalid library found in C:\Users\C855-1J2\Documents\Arduino\libraries\Adafruit_HX8357_Library-master: C:\Users\C855-1J2\Documents\Arduino\libraries\Adafruit_HX8357_Library-master
    Invalid library found in C:\Users\C855-1J2\Documents\Arduino\libraries\Arduino-master119903: C:\Users\C855-1J2\Documents\Arduino\libraries\Arduino-master119903

    This report would have more information with
    “Show verbose output during compilation”
    option enabled in File -> Preferences.

    Hi,
    I am new to Arduino is there anyone able to help me as I do not understand why I’m getting this error. thanks for the help,

Leave a Reply

Your email address will not be published. Required fields are marked *